TENSÕES NORMAIS EM VIGAS FELIX SILVA BARRETO RESISTÊNCIA DOS MATERIAIS
FG06_21a.TIF Notes: Undeformed bar has a square cross section and is marked with longitudinal and transverse grid lines.
FG06_21b.TIF Notes: When a bending moment is applied, it tends to distort these lines into the pattern
FG06_21-01UN01.TIF Notes: Note the distortion of the lines due to bending of this rubber bar.
FG06_21-01UN02.TIF Notes: Note the distortion of the lines due to bending of this rubber bar.
FG06_22a_b.TIF Notes: The longitudinal axis x, which lies within the neutral surface,does not experience any change in length.
FG06_25.TIF Notes: If the beam has a square cross section, it will actually deform
FG06_26c.TIF Notes: The moment of dF about the neutral axis is dM 5 y dF.
FG06_27b.TIF Notes: Example 6-14: solution
FG06_27c.TIF Notes: Example 6-14: solution
Determinar a tensão normal máxima da viga e a tensão no ponto B da seção. FG06_28a.TIF Notes: Example 6-15
Diagrama de momento fletor FG06_28c.TIF Notes: Example 6-15: solution
FG06_28d_e.TIF Notes: Example 6-15: solution
Determinar a tensão normal máxima na seção abaixo. FG06_30a.TIF Notes: Example 6-17 Resposta: 4,44 MPa
RESISTÊNCA DOS MATERIAIS Um elemento com as dimensões mostradas na figura deverá ser usado para resistir a um momento fletor interno M = 2 kNm. Determine a tensão máxima no elemento se o momento for aplicado: Em torno do eixo z; Em torno do eixo y; Respostas: a) 13,89 MPa e b) 27,78 MPa RESISTÊNCA DOS MATERIAIS